Extrusion Blown Film Lines
- 產品服務:
單螺桿擠出機; 雙螺桿擠出機; 橡膠擠出機; 換網器; 熔體泵; 線纜直角擠出機頭; 水下造粒系統; 廢塑料清洗機; 廢塑料干燥機
- 所屬類別:
供應 > 擠出機
- 單價:
0.00
- 最小起訂
量: 0
- 供貨總量:
0/臺
- 發貨期限:
3
- 有效期至:
長期有效
- 最后更新:
2016-07-06
公司的基本資料信息
- 郵件: info@telfordsmith.com.cn
- 電話: 0574 8309 2181
- 手機: 18067127628
- 地區: 寧波市
- 地址: 浙江省寧波市江北區洪塘工業A區洪達路8號?
產品詳細說明
The predominant raw material in this process is polyethylene, most of it LDPE, some LLDPE, and for paper-like films - high-molecular weight HDPE. A few examples of the applications of blown film include packaging from snack to shopping bags, shrink film, stretch wrap, agriculture films, building films, multi-layer films, protective films and hundreds of other products.
This, again, is a process wher Telford Smith's broad range of extruders maximise line performance necessary for the profitable production of lay-flat tubing, shrink film or sheeting.
Low barrel centre line heights are required to utilise the full cooling availability of the tower height from the die face to the upper nip roll. Telford Smith Engineering manufacture extruders constructed especially for this application with side mounted blowers and drive motors to minimise height, maximise cooling and increase line speeds.
Blown film extruder screws lend themselves perfectly to Telford Smith Engineering barrier designs. In contrast to conventional screws wher solids become suspended in the melt pool, the barrier flight (intermediate flight) is used to segregate the melted polymer from the solids, and provide separate treatment for the solid and liquid component. The net result is a more comprehensive melting process that permits use of deeper final metering channels with higher corresponding metering rates (higher outputs). Consequently melt temperature is reduced and temperature uniformity is improved. Since less heat is generated to complete the melt with a barrier screw energy saving occurs.
Co-extrusion as the name implies relates to the extrusion of two or more polymer layers through a common die. Extruder design is the same as that for mono extrusion with some minor but important design changes. These are mobility and height adjustment. Mobility is required to allow for thermal expansion and contraction of the extruder barrel. Height adjustment is necessary to precisely align the extruder with the die adaptors and prevent polymer leakage. Telford Smith Engineering have addressed these aspects and designed a wheel box with built in height adjustment and a small amount of lateral (side) movement. This has resulted in a user-friendly system meeting this criterion.
Screw design for the primary layers would be as per mono extrusion. For the barrier and adhesive layers (typically E V O H, Nylon and Ionomers) a different approach to screw design must be adopted. Telford Smith Engineering has the experience and technology that is essential in ensuring these sensitive polymers are not contaminated during extrusion. Superior screw design, maintains a high level of processability and film quality.
本企業其它產品
{php $tags=tag
("moduleid=5&condition=username='$username' and
status=3&pagesize=5&template=null");}